Dell iDRAC6 User Manual page 91

Table 5-2. Network Settings (continued)
Setting
Gateway
Use DHCPv6 to
obtain DNS Server
addresses
Preferred DNS
Server
Alternate DNS
Server
Table 5-3. IPMI Settings
Setting Description
Enable IPMI When selected, indicates that the IPMI LAN channel is enabled.
Over LAN The default is Unchecked.
Channel Configures the maximum privilege level for the user that can be
Privilege Level accepted on the LAN channel. Select one of the following options:
Limit Administrator, Operator, or User. The default is Administrator.
Encryption Key Configures the encryption key.
Description
Configures the static IPv6 gateway for the iDRAC6 NIC. To
change this setting, you must first disable Autoconfiguration
Enable by deselecting the associated checkbox.
Enable DHCP to obtain IPv6 DNS server addresses by selecting
the Use DHCPv6 to obtain DNS Server addresses checkbox.
When not using DHCP to obtain the DNS server addresses,
provide the IP addresses in the Preferred DNS Server and
Alternate DNS Server fields. The default is Unchecked.
NOTE:
When the Use DHCPv6 to obtain DNS Server addresses
checkbox is selected, IP addresses cannot be entered into the
Preferred DNS Server and Alternate DNS Server fields.
Configures the static IPv6 address for the preferred DNS server.
To change this setting, deselect Use DHCPv6 to obtain DNS
Server Addresses.
Configures the static IPv6 address for the alternate DNS server.
To change this setting, deselect Use DHCPv6 to obtain DNS
Server Addresses.
Configuring iDRAC6 Enterprise Using the Web Interface
91