Dell iDRAC6 User Manual page 165

Table 7-1. Distributed Versions of the C++ Redistributable Package (continued)
Redistributable
Package File Name
vcredist_x86.exe
• Ensure that iDRAC6 time and the domain controller time at the domain
controller server are within 5 minutes of each other for Kerberos
authentication to work. See the iDRAC6 time on the System→ Remote
Access→ iDRAC6→ Properties→ Remote Access Information page, and the
domain controller time by right clicking on the time in the bottom right
hand corner of the screen. The timezone offset is displayed in the pop up
display. For US Central Standard Time (CST), this is –6 ). Use the
following RACADM timezone offset command to synchronize the
iDRAC6 time (through Remote or Telnet/SSH RACADM): racadm
config -g cfgRacTuning –o cfgRacTuneTimeZoneOffset
<offset value in minutes>. For example, if the system time is
GMT -6 (US CST) and time is 2PM, set the iDRAC6 time to GMT time
of 18:00 which would require you to enter
the offset. You can also use cfgRacTuneDaylightoffset to allow for daylight
savings variation. This saves you from having to change the time on those
two occasions every year when the daylight savings adjustments are made,
or just allow for it in the above offset using
Version Release Date
9.0.21022.8 November 7, 2007 1.73 MB MS
Configuring Smart Card Authentication
Size Description
Redistributable
2008
" "
360 in the above command for
" "
300 in the above example.
165