Extended Schema Using Idrac6 Web Interface - Dell iDRAC6 User Manual

Adding iDRAC6 Devices or iDRAC6 Device Groups
To add iDRAC6 devices or iDRAC6 device groups:
1 Select the Products tab and click Add.
2 Enter iDRAC6 devices or iDRAC6 device group name and click OK.
3 In the Properties window, click Apply and click OK.
Click the Products tab to add one iDRAC6 device connected to the network
that is available for the defined users or user groups. You can add multiple
iDRAC6 devices to an Association Object.
Configuring Active Directory With Extended Schema Using iDRAC6 Web
Interface
1 Open a supported Web browser window.
2 Log in to iDRAC6 Web interface.
3 In the system tree, select System→ Remote Access→ iDRAC6.
The Remote Access Information screen appears.
4 Click the Network/Security tab, and then click Active Directory.
The Active Directory Configuration and Management summary screen
appears.
5 Scroll to the bottom of the screen and click Configure Active Directory.
The Step 1 of 4 Active Directory Configuration and Management screen
appears.
6 To validate the SSL certificate of your Active Directory servers, select the
Certificate Validation Enabled check box under Certificate Settings.
If you don't want to validate the SSL certificate of your Active Directory
servers, take no action, and skip to step 8.
7 Under Upload Active Directory CA Certificate, enter the file path of the
certificate or browse to find the certificate file, and then click Upload.
NOTE:
the complete file name and file extension.
The certificate information for the Active Directory CA certificate that you
uploaded appears in the Current Active Directory CA Certificate section.
136
Using iDRAC6 With Microsoft Active Directory
You must enter the absolute file path, which includes the full path and