Dell iDRAC6 User Manual page 331

Table 20-13. Frequently Asked Questions/Troubleshooting (continued)
Question
How can I find
the IP address of
CMC?
iDRAC6 network
connection is
not working.
I inserted the
server into the
chassis and
pressed the
power button,
but nothing
happened.
Answer
From iDRAC6 Web interface:
• Click System→ Remote Access→ CMC.
The CMC IP address is displayed on the CMC Summary screen.
From the iKVM:
• Select the "Dell CMC" console in the OSCAR to log in to the
CMC through a local serial connection. CMC RACADM
commands can be issued from this connection. See the Dell
Chassis Management Controller Administrator Reference Guide
for a complete list of the CMC RACADM subcommands
$ racadm getniccfg -m chassis
NIC Enabled
DHCP Enabled
Static IP Address
Static Subnet Mask
Static Gateway
Current IP Address
Current Subnet Mask = 255.255.255.0
Current Gateway
Speed
Duplex
NOTE:
The above action can also be performed with remote
RACADM.
• Ensure that the LAN cable is connected to the CMC.
• Ensure that NIC settings, IPv4 or IPv6 settings, and either Static
or DHCP is enabled for your network.
• iDRAC6 requires upto 2 minutes to initialize before the server
can power up.
• Check the CMC power budget. The chassis power budget may
be exceeded.
Recovering and Troubleshooting the Managed System
= 1
= 1
= 192.168.0.120
= 255.255.255.0
= 192.168.0.1
= 10.35.155.151
= 10.35.155.1
= Autonegotiate
= Autonegotiate
331