Using The -Level Option - Dell iDRAC6 User Manual

/admin1/system1/sp1/oemdcim_mfaaccount1 show -display
properties,targets
To list only certain properties, qualify them, as in the following command:
show –d properties=(userid,name)
/admin1/system1/sp1/oemdcim_mfaaccount1
If you only want to show one property, you can omit the parentheses.

Using the -level Option

The show -level option executes show over additional levels beneath the
specified target. To see all targets and properties in the address space, use the
-l all option.
Using the -output Option
The -output option specifies one of four formats for the output of SM-CLP
verbs: text, clpcsv, keyword, and clpxml.
The default format is text, and is the most readable output. The clpcsv
format is a comma-separated values format suitable for loading into a
spreadsheet program. The keyword format outputs information as a list of
keyword=value pairs one per line. The clpxml format is an XML document
containing a response XML element. The DMTF has specified the clpcsv and
clpxml formats and their specifications can be found on the DMTF website
at .
www.dmtf.org
The following example shows how to output the contents of the SEL in XML:
show -l all -output format=clpxml
/admin1/system1/logs1/log1
iDRAC6 SM-CLP Examples
The following subsections provide examples on how to login to iDRAC6
using the SSH interface and start an SM-CLP session to perform the
following operations:
• Server power management
• SEL management
• MAP target navigation
Using iDRAC6 Enterprise SM-CLP Command Line Interface
277