Idrac6 Lan - Dell iDRAC6 User Manual

Remote access controller 6
Hide thumbs Also See for iDRAC6:
Table of Contents

Advertisement

The bottom line of the screen displays instructions for the current item.
You can press <F1> to display help for the current item.
When you have finished using iDRAC6 Configuration Utility,
press <Esc> to view the exit menu, where you can choose to save or
discard your changes or return to the utility.
The following sections describe iDRAC6 Configuration Utility menu items.

iDRAC6 LAN

Use the left-arrow and right-arrow keys and the spacebar to select between
On and Off.
iDRAC6 LAN is disabled in the default configuration. The LAN must be
enabled to permit the use of iDRAC6 facilities, such as the Web interface,
Telnet/SSH access to the SM-CLP command line interface, console
redirection, and virtual media.
If you choose to disable the LAN the following warning displays:
iDRAC Out-of-Band interface will be disabled if the
LAN Channel is OFF.
The message informs you that in addition to facilities that you access by
connecting to iDRAC6 HTTP , HTTPS, Telnet, or SSH ports directly, out-of-
band management network traffic, such as IPMI messages sent to iDRAC6
from a management station, are not received when the LAN is disabled. The
local RACADM interface remains available and can be used to reconfigure
iDRAC6 LAN.
Press any key to clear the message and continue.
IPMI Over LAN
Press the left-arrow and right-arrow keys and the spacebar to choose between
On and Off. When Off is selected, iDRAC6 will not accept IPMI messages
arriving over the LAN interface.
If you choose Off, a warning message is displayed.
Press any key to clear the message and continue. For an explanation of the
message, see "iDRAC6 LAN."
Using iDRAC6 Configuration Utility
299

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents