Vmdisconnect - Dell iDRAC6 User Manual

Table A-36. cfg e-mail Alert Commands
Action
Enable the alert
Set the destination
e-mail IP address
View the current test trap
settings
Input
Table A-37 describes the testtrap subcommand options.
Table A-37. testtrap Subcommand Options
Option Description
-i Specifies the index of the trap configuration to use for the test Valid
values are from 1 to 4.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM

vmdisconnect

Synopsis
racadm vmdisconnect
Description
The vmdisconnect subcommand allows a user to disconnect another user's
virtual media session. Once disconnected, the Web interface will reflect the
correct connection status.
Command
racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertEnable -i 1 1
racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertDestIpAddr -i 1
192.168.0.110
racadm getconfig -g cfgIpmiPet -i
<index>
where <index> is a number from 1 to 4
RACADM Subcommand Overview
367