Getractime - Dell iDRAC6 User Manual

Examples
•
racadm getsysinfo -A -s
"System Information:" "PowerEdge M600" "0.2.1"
"0.32" "48192" "dell-x92i38xc2n" "" "ON"
•
racadm getsysinfo -w -s
System Information:
System Model
System BIOS Version
BMC Firmware Version
Service Tag
Host Name
OS Name
Power Status
Watchdog Information:
Recovery Action
Present countdown value
Initial countdown value
Restrictions
The Hostname and OS Name fields in the getsysinfo output display accurate
information only if Dell OpenManage Server Administrator is installed on the
managed server. If it is not installed on the managed server, these fields may
be blank or inaccurate. An exception to this are VMware
names which are displayed even if Server Administrator is not installed on the
managed system.

getractime

Table A-10 describes the getractime subcommand.
Table A-10. getractime
Subcommand
getractime
346
RACADM Subcommand Overview
= PowerEdge M600
= 0.2.1
= 0.32
= 48192
= dell-x92i38xc2n
=
= ON
= None
= 0 seconds
= 0 seconds
Definition
Displays the current time from the remote access
controller.
®
operating system