Dell iDRAC6 User Manual page 141

Figure 6-3. Configuration of iDRAC6 with Microsoft Active Directory and
Standard Schema
Configuration on
Configuration on Active
iDRAC6 Side
Directory Side
Role
Group Name
Role Role
and Domain
Group Definition
Name
User
On the Active Directory side, a standard group object is used as a role group.
A user who has iDRAC6 access will be a member of the role group. To give
this user access to a specific iDRAC6 card, the role group name and its
domain name need to be configured on the specific iDRAC6 card. Unlike the
extended schema solution, the role and the privilege level is defined on each
iDRAC6 card, not in the Active Directory. Up to five role groups can be
configured and defined in each iDRAC6. Table 6-9 shows the default role
group privileges.
141
Using iDRAC6 With Microsoft Active Directory