Dell iDRAC6 User Manual page 164

Tip: As a general check to see if the Smart Card CSPs are present on a
particular client, insert the Smart Card in the reader at the Windows logon
(Ctrl-Alt-Del) screen and check to see if Windows detects the Smart Card
and displays the PIN dialog-box.
Incorrect Smart Card PIN
Check to see if the Smart Card has been locked out due to too many attempts
with an incorrect PIN. In such cases, the issuer of the Smart Card in the
organization will be able to help you get a new Smart Card.
Unable to Log into iDRAC6 as an Active Directory User
• If you cannot log into iDRAC6 as an Active Directory user, try to log
into iDRAC6 without enabling the Smart Card logon. You can disable the
Smart Card logon through racadm using the following command:
racadm config –g cfgSmartCard –o
cfgSmartCardLogonEnable 0
• For 64–bit Windows platforms, the iDRAC6 authentication plug–in will
not get installed properly if a 64–bit version of
2005 Redistributable Package
version of
plug–in to install and run properly.
• If you receive the following error message
Smart Card Plug–in. Please check your IE settings
or you may have insufficient privileges to use the
Smart Card Plug–in
Redistributable Package
www.microsoft.com. Two distributed versions of the C++ Redistributable
Package have been tested and they allow the Dell Smart Card plug–in to
load:
Table 7-1. Distributed Versions of the C++ Redistributable Package
Redistributable
Package File Name
vcredist_x86.exe
164
Configuring Smart Card Authentication
Microsoft Visual C++ 2005 Redistributable Package
"
"
"
. This file is available on the Microsoft Website at
Version
6.0.2900.2180 March 21, 2006
is deployed. You need to deploy the 32–bit
"
"
Not able to load the
, then install the
Release Date
Microsoft Visual C++
"
"
Microsoft Visual C++ 2005
Size Description
2.56 MB MS
Redistributable
2005
for the
"