Adding And Configuring Idrac6 Users - Dell iDRAC6 User Manual

NOTE:
Rate is identical to your managed server's baud rate.
Click Apply.
e
Configure IP filtering and blocking settings as needed in the
f
Advanced Settings page.

Adding and Configuring iDRAC6 Users

To manage your system with iDRAC6 and maintain system security, create
unique users with specific administrative permissions (or role-based authority).
To add and configure iDRAC6 users, perform the following steps:
NOTE:
You must have Configure iDRAC permission to perform the following steps.
1 Click System→ Remote Access→ iDRAC6→ Network/Security→ Users.
The Users screen displays each user's User ID, State, User Name,
IPMI LAN Privileges, iDRAC6 Privileges, and Serial Over LAN capability.
NOTE:
User-1 is reserved for the IPMI anonymous user and is not configurable.
2 In the User ID column, click a user ID number.
3 On the User Configuration screen, configure the user's properties and
privileges.
Table 5-9 describes the General settings for configuring an iDRAC6 user
name and password.
Table 5-10 describes the IPMI LAN Privileges for configuring the user's
LAN privileges.
Table 5-11 describes the User Group permissions for the IPMI LAN
Privileges and iDRAC6 User Privileges settings.
Table 5-12 describes the iDRAC Group permissions. If you add an iDRAC
User Privilege to the Administrator, Power User, or Guest User, iDRAC6
Group will change to the Custom group.
4 When completed, click Apply.
5 Click the appropriate button to continue. See Table 5-13.
98
Configuring iDRAC6 Enterprise Using the Web Interface
To redirect the serial console over the LAN, ensure that the SOL Baud