Using Serial Over Lan (Sol) - Dell iDRAC6 User Manual

8 Click Services to open the Services screen.
NOTE:
9 Click Enabled on either SSH or Telnet as required.
10 Click Apply.
NOTE:
encryption mechanisms.
NOTE:
value is set to 0. The default timeout value is 1800 seconds.
11 Enable iDRAC6 Out-of-Band interface (IPMI over LAN) by selecting
System→ Remote Access→ iDRAC6→ Network/Security→ Network.
12 Select the Enable IPMI Over LAN option under IPMI Settings.
13 Click Apply.

Using Serial Over LAN (SOL)

This section provides several methods to initialize a Serial-Over-LAN session
including a Telnet program, an SSH client, IPMItool, and SOL Proxy.
The purpose of Serial Over LAN feature is to redirect the serial port of the
managed server through iDRAC6 into the console of your management station.
Model for Redirecting SOL Over Telnet or SSH
Telnet (port 23)/ SSH (port 22) client ← → WAN connection ← → iDRAC6
server
The IPMI-based SOL over SSH/Telnet implementation eliminates the need for
an additional utility because the serial to network translation happens within the
iDRAC6. The SSH or Telnet console that you use should be able to interpret and
respond to the data arriving from the managed server's serial port. The serial port
usually attaches to a shell that emulates an ANSI- or VT100/VT220–terminal.
The serial console is automatically redirected to your SSH or Telnet console.
To initiate a SOL session, attach to iDRAC6 through SSH/Telnet which takes
you to the iDRAC6 command line console. Then enter
prompt.
See "Installing Telnet or SSH Clients" for more information about using
Telnet and SSH clients with iDRAC6.
SSH and Telnet programs both provide access on a remote machine.
SSH is a recommended method due to better security and
SSH/Telnet session duration can be infinite as long as the timeout
Configuring and Using Serial Over LAN
connect at the dollar
" "
191