Dell iDRAC6 User Manual page 243

Table 15-1. RACADM Subcommands (continued)
Command
gettracelog
help
help <subcommand> Lists usage statement for the specified subcommand.
ifconfig
krbkeytabupload
localconredirdisable
netstat
ping
ping6
racdump
racreset
racresetcfg
remoteimage
serveraction
setniccfg
sshpkauth
sslcertdownload
sslcertupload
sslcertview
Description
Displays iDRAC6 trace log. If used with -i, the command
displays the number of entries in iDRAC6 trace log.
Lists iDRAC6 subcommands.
Displays the contents of the network interface table.
Uploads a Kerberos keytab file.
Performs local kVM disable from the local system.
Displays the routing table and the current connections.
Verifies that the destination IP address is reachable from
iDRAC6 with the current routing-table contents. A
destination IP address is required. An ICMP echo packet is
sent to the destination IP address based on the current
routing-table contents.
Verifies that the destination IPv6 address is reachable from
iDRAC6 with the current routing-table contents. A
destination IPv6 address is required. An ICMP echo packet is
sent to the destination IPv6 address based on the current
routing-table contents.
Displays status and general iDRAC6 information.
Resets iDRAC6.
Resets iDRAC6 to the default configuration.
Remote file share
Performs power management operations on the
managed server.
Sets the IP configuration for the controller.
Enables you to upload up to 6 different SSH public keys,
delete existing keys, and view the keys already in the CMC.
Downloads a CA certificate.
Uploads a CA certificate or server certificate to iDRAC6.
Views a CA certificate or server certificate in iDRAC6.
Using the RACADM Command Line Interface
243