Installing Idrac6 Software On The Management Station - Dell iDRAC6 User Manual

4 In the Preferences Name column, locate xpinstall.enabled.
Ensure that Value is true. If not, double-click xpinstall.enabled to set
Value to true.
Installing iDRAC6 Software on the Management
Station
Your system includes the Dell Systems Management Tools and Documentation
DVD. This DVD includes the following components:
• DVD root - Contains the Dell Systems Build and Update Utility,
which provides server setup and system installation information
• SYSMGMT - Contains the systems management software products
including Dell OpenManage Server Administrator
• Docs - Contains documentation for systems management software
products, peripherals, and RAID controllers
• SERVICE - Contains the tools you need to configure your system, and
delivers the latest diagnostics and Dell-optimized drivers for your system
Installing and Removing RACADM on a Linux Management Station
To use the remote RACADM functions, install RACADM on a management
station running Linux.
NOTE:
When you run Setup on the Dell Systems Management Tools and
Documentation DVD, the RACADM utility for all supported operating systems is
installed on your management station.
Installing RACADM
1 Log on as root to the system where you want to install the management
station components.
2 If necessary, mount the Dell Systems Management Tools and
Documentation DVD using the following command or a similar command:
mount /media/cdrom
3 Navigate to the /linux/rac directory and execute the following command:
rpm -ivh *.rpm
74
Configuring the Management Station