Honeywell KMD-150 Pilot's Manual page 117

CDI FLAG
In View
Out of View
TO/FROM FLAG
TO
FROM
FLAG OUT OF VIEW Ensure TO and FROM are not visible
NAV SUPERFLAG
ACTIVE
INACTIVE
WPT Alert
OFF
ON
Message Alert
OFF
ON
Message Audio
OFF
ON
OBI/RMI
VALID
INVALID
OBI SETTING
Set in steps of 45°
Rev 1 Mar/2000
Ensure CDI or NAV flag is visible
Ensure CDI or NAV flag is not visible
Ensure TO flag is visible
Ensure FROM flag is visible
Ensure Nav Superflag is active
Ensure Nav Superflag is inactive
Ensure the WPT Annunciator is OFF
Ensure the WPT Annunciator is ON
Ensure the MSG Annunciator is OFF
Ensure the MSG Annunciator is ON
Check Audio output is OFF
Check Audio outputs is ON
Ensure that OBI/RMI output reads the
selected value
Ensure that the OBI/RMI is INVALID
Use in conjunction with the above to test
OBI/RMI
103
Setup Screens
KMD 150 Pilot's Guide