Table of Contents
Advertisement
INSTALLATION AND DIAGNOSTIC SCREENS
This Screen is accessed
by pressing Key 4,
SETUP, in Main Menu
followed by Key 5, INST
& DIAGS, in
Screen 21,
Setup Cover Screen.
Screen 28 gives you
access to all installation
and test-related Screens,
and will allow you to per-
form diagnostic checks
on the data input and
output lines.
You can also use this
Screen to gain full access
to the "time in service" logs and "last flight" log. It is used, in addition, to
enter four different "Memory Clear" routines, which are PIN-protected to
prevent inadvertent erasure to the unit's memory.
Key 1 returns you to
Key 2 calls
Screen 63,
Key 3 calls
Screen 30,
Key 4 calls
Screen 32,
Key 5 calls
Screen 35,
SCREEN POSITION SETUP
Screen 63
is for use during manufacture to position the picture centrally
in the viewable area of the display. This screen is also used to focus the
image on the display. It is not a Screen, which you as a user of the KMD
150 should need to access so it is protected by an engineering PIN code
to prevent accidental alteration of the factory settings.
Rev 1 Mar/2000
Screen 28: Installation and Diagnostics
Screen 21,
Setup Cover Screen.
Screen Position Setup Screen.
Engineering Log Screen.
Memory Clear Entry Screen.
Data In/Out and Test Screen.
97
Setup Screens
Cover Screen
KMD 150 Pilot's Guide
Hide quick links:
Advertisement
Table of Contents
