Download  Print this page

Clear Memory - Honeywell KMD-150 Pilot's Manual

Multifunction display/gps.
Hide thumbs

Advertisement

Getting Started
Any changes made in this screen will be saved once the OK key has
been pressed. At any time the RESET VALUES key can be pressed to
return your unit to the default settings. If you wish to reset all setup
options (including MAP SETUP options) to their default setting press the
CLEAR SETUP key in the Clear Memory screen.

CLEAR MEMORY

To clear down specific
parts
of
your
units
memory press SET UP in
MAIN MENU, followed by
INST & DIAGS and
CLEAR MEMORY. You
will then be asked to
enter your PIN.
Unit
default is 1234. You are
now in the Clear Memory
screen. Each block of
memory in your unit can
be cleared down individu-
ally. CLEAR FLPNs will
remove all your flight plans. CLEAR WPTS will remove all your user
waypoints. CLEAR SETUP will restore all the default settings in MAP
SETUP and NAV SETUP. CLEAR LOG will clear the last flight informa-
tion, the 2000 flight logged data points and all running timers.
31
Rev 1 Mar/2000
KMD 150 Pilot's Guide

Advertisement

   Related Manuals for Honeywell KMD-150

Comments to this Manuals

Symbols: 0
Latest comments: