Screen 44: Airport Information Screen - Honeywell KMD-150 Pilot's Manual

To obtain a DIRECT TO for the chosen airport all you have to do is
press Key 5, labeled DIRECT TO, and you will switch back to
47) Map Mode with the selected DIRECT TO activated.
Key 1, MAP, returns you to Map Mode
you to the NAV Menu Cover Screen
NEAR NAVAID, you can switch to
giving information about the ten nearest navaids.
Once you have selected
an airport on Screen 43
and pressed Key 3,
MORE INFO, the display
will change to Screen 44.
This gives additional
information about run-
ways, frequencies, eleva-
tion etc. for the airport in
question.
To return from this
Screen to Map Mode
(Screen 38 or
simply press Key 2. To
select another airport from
the Ten Nearest
list of ten nearest navaids, simply press Key 4, which will take you
directly to Screen 45,
the chosen airport all you have to do is press Key 5, labeled DIRECT
TO, and you will switch back to
DIRECT TO activated.
If you want to view the area immediately around the chosen airport,
press Key 3. This will call
the View and Edit User Waypoint on the Map Screen.
revert back to screen 44 after 30 seconds with no key or joystick activity
or can be cancelled by pressing Key 1, PREV PAGE.
Rev 1 Mar/2000
47) you

Screen 44: Airport Information Screen

(Screen 43) you press Key 1 and if you want to see the
Ten Nearest Navaids. To obtain a DIRECT TO for
(Screen 47)
Screen 10A
,Screen 38
(Screen 41).
Screen 45, Ten Nearest Navaids,
Map Mode with the selected
that is very similar to
69
Nav Menu Screens
(Screen
or 47. Key 2 returns
By pressing Key 4,
Screen 10,
Screen 10A
KMD 150 Pilot's Guide
will