Download  Print this page

Selecting Item From Chosen Database; Screen 15: Temporary Waypoint Input Screen; Screen 16: Item Selection Screen - Honeywell KMD-150 Pilot's Manual

Multifunction display/gps.
Hide thumbs

Advertisement

Flight Planning Screens
If Key 1, PREV PAGE, is pressed to discontinue the selection process
the unit will return to whichever the previous Screen was, either
Screen
12,
Flight Plan Program/Edit Screen, or
Screen 38,
Map Mode.
This Screen allows you to
select a DIRECT TO spe-
cific latitude and longi-
tude, and is reached by
pressing Key 5 Temp
Wpt on
Screen 13.
Use the joystick to enter
the latitude and longitude
of the destination then
press Key 2, ENTER,
and
Screen 47,
Map
Mode with Navigation
Information, will appear
Screen 15: Temporary Waypoint Input
with DIRECT TO OFF on
Screen
Key 5.
SELECTING ITEM
FROM CHOSEN DATA-
BASE
On entry to this Screen
you will find the cursor
positioned over the first
letter of the first item in
the selected database.
If AIRPORTS, VORs,
NDBs, INTs or AIRWAYS
was selected on
Screen

Screen 16: Item Selection Screen

13,
the first item in the
data entry box on screen
16 is AREA:. This is an area filter that can be set to a specific ICAO
country or area code. If set to EG for example, only items in British air-
space will appear in the list. Similarly, if set to LF, only items in French
airspace will be displayed. In the USA, the airspace is sub-divided into
seven areas known as K1 - K7. The area filter can again be set to any of
these areas (see
Appendix 2
for a full list of country and area codes).
If the area filter is set to ALL, all the data from the selected database
contained on the database card for the entire area covered will appear in
the list.
54
Rev 1 Mar/2000
KMD 150 Pilot's Guide

Advertisement

   Related Manuals for Honeywell KMD-150

   Related Content for Honeywell KMD-150

Comments to this Manuals

Symbols: 0
Latest comments: