Screen 40B: Airspace Information Screen - Honeywell KMD-150 Pilot's Manual

Map Mode Screens
When a single airspace boundary line is shared by two different
pieces of airspace (which is very common), the airspace with the
lower vertical limit will always be highlighted.
Once you are sure the piece of airspace highlighted is the piece you
want information on (you may have to zoom out to verify this, but
beware, some airspace switches off as you zoom out dependant on the
settings made in
MORE INFO key and MORE INFO key and
displayed.
The information shown on
this screen is all the infor-
mation from the internal
Jeppesen database that is
relevant to the airspace you
have selected. If some of
the fields are blank or say
SEE CHART, this means
that Jeppesen data is not
available for that particular
item.
Rev 1 Mar/2000
IMPORTANT:
Screen 22C, Airspace Data Class Setup Screen), press
Screen 40B, Screen 40B,
Screen 40B: Airspace Information
Airspace Information Screen, will be Airspace Information Screen, will be
Screen
64
KMD 150 Pilot's Guide