Download  Print this page

Editing User Airports; Flight Plans; Screen 8a: User Airfield Edit Screen; Screen 11: Flight Plan Selection Screen - Honeywell KMD-150 Pilot's Manual

Multifunction display/gps.
Hide thumbs


Flight Planning Screens
New user waypoints can be created wherever the pointer is placed
simply by pressing Key 2, ENTER WPT. Existing user waypoints can be
deleted by positioning the pointer directly over them and then pressing
Key 5, DELETE WPT. Should you attempt to delete a user waypoint
that is being used in a stored Flight Plan, the [PRESENT IN FLIGHT
PLAN] message box will be displayed and the user waypoint will NOT be
deleted. Pressing Key 5, DELETE WPT, a second time will then delete
the user waypoint. Alternatively, moving the joystick while the [PRE-
SENT IN FLIGHT PLAN] message box is displayed shall result in can-
celling the delete command.
Each new user waypoint graphically created on the map will automati-
cally be given the next available user waypoint number as a temporary
name and the default icon but you can alter the name and icon later by
Screen 9,
Manual User Waypoint Edit Screen.


Whenever you select a
user waypoint number
between 101 and 125 in
Screen 8,
User Waypoint
Viewer Screen, Screen
8A, User Airport Edit
Screen, will be displayed.
This is similar to
Screen 8
but contains data entry
fields where you can
enter and store additional
information about the air-
port's main runway and
Screen 8A: User Airport Edit Screen


The flight plan function
allows you to store up to
explained earlier in this
These flight
plans can be recalled
from memory and flown
in Map Navigation Mode.
You can choose to use
as waypoints any way-
points from the built-in

Screen 11: Flight Plan Selection Screen

Rev 1 Mar/2000
KMD 150 Pilot's Guide


   Related Manuals for Honeywell KMD-150

   Related Content for Honeywell KMD-150

Comments to this Manuals

Symbols: 0
Latest comments: