Stormscope Demo Mode; Screen 50: Representation Of Screen 47 Showing Demo Mode Flag - Honeywell KMD-150 Pilot's Manual

Demo Mode
In order to run Demo
Mode for any length of
time, it will be necessary
to park the aircraft in a
hanger where the internal
GPS receiver can not
receive a signal.
If Demo Mode is active
and you switch to Screen
2, Main Menu Screen,
you will see Key 3 is now
labeled DEMO OFF and
can be used to cancel
Demo Mode.
Screen 50: Representation of Screen 47
Showing DEMO MODE Flag

STORMSCOPE DEMO MODE

If you have a WX-500 Stormscope sensor connected to your KMD 150,
entering Demo Mode on the KMD 150 will also cause the WX-500 to
enter Demo Mode. When in Demo Mode, the WX-500 will output
random storm patterns which will be received and interpreted by the
KMD 150 in the normal way. See STORMSCOPE OPERATION for fur-
ther details on the WX-500 interface option.
130
Rev 1 Mar/2000
KMD 150 Pilot's Guide