Table of Contents
Advertisement
Title and Help Screens
MAIN MENU SCREEN
If set up for internal GPS
use, Key 1 calls
Screen
3,
which is the GPS
Status Screen. The joy-
stick can be used on this
screen to switch the
BFGoodrich
WX-500
Stormscope interface on
and off. If Stormscope is
switched on, Key 1 will
be labeled STORM-
SCOPE and will cause
the Stormscope screens
Screen 2: Main Menu Screen
to be displayed. GPS
data screens can still be
accessed in this case through the INST & DIAGS key under SETUP or
by switching the Stormscope interface off using the joystick. Key 2 calls
Screen 7,
which is the Flight Planning Mode Cover Screen (not available
in External GPS Mode). Key 3 will read NOTE PAD if DEMO MODE
was not selected on
Screen 1.
Pressing Key 3 will call
screen 62,
which
is the NOTE PAD display screen and will also give access to
Screen 57,
which is the E6-B Calculator Cover Screen (Refer to section on
E6-B
Calculator).
If Demo Mode has previously been activated, Key 3 will
read DEMO OFF. Pressing DEMO OFF will then switch Demo Mode off
and return to
Screen 2
with Key 3 reading NOTE PAD. Key 4 calls
Screen 21,
which is the Setup Cover Screen. Key 5 calls
Screen 38
or
47,
which are Map Mode and Map Mode with NAV Information Screens.
NOTE PAD
SCREEN
The Note Pad Screen
(Screen 62) is accessed
by pressing Key 3 on
Screen 1
or
Screen 2,
Main Menu Screen.
The Note Pad function
allows you to load up to
4000 characters of text
into your GPS unit from a
personal computer run-
Screen 62: Notepad Screen
ning suitable flight plan-
ning software. This text
can then be recalled on a special Note Pad screen during flight.
35
Rev 1 Mar/2000
KMD 150 Pilot's Guide
Hide quick links:
Advertisement
Table of Contents
