Download  Print this page

Honeywell KMD-150 Pilot's Manual Page 27

Multifunction display/gps.
Hide thumbs

Advertisement

PIN SETUP
INST & DIAGS Allows installation and diagnostics for data input/output
and GPS receiver (KMD 150 only) to be performed. Flight logs can be
viewed and various sections of memory can be cleared from here.
MAP
will automatically drop into this mode 30 seconds after switch on if no
other key is activated.
NAV MENU
Joystick toggles NAV Mode.
FLIGHT PLAN
NEAR APTS
NEAR NAVAID Allows emergency search of 10 nearest navaids
SAVE WPT Allows your present co-ordinates to be saved in the
DIRECT TO
the internal or user defined database. It may also be used to obtain
information on any point in the database.
There are short cuts that allow you to get to the primary operating mode,
MAP mode, more easily; but in general if you wish to get to a specific
function in another branch of software, work your way back up the pre-
sent branch to MAIN MENU by pressing either the PREV PAGE or MAIN
MENU keys. Then select the branch of software that contains the
desired function you wish to access.
Rev 1 Mar/2000
Allows the PIN security function to be Setup.
This is the primary operating mode of the unit. The unit
Accesses all navigation functions and MSA information.
Allows a Flight Plan to be selected and edited.
Allows emergency search of 10 nearest airports,
providing information and DIRECT TO capability.
Includes Jeppesen and user defined airports
which satisfies the minimum runway length and
surface requirements.
(VORs and NDBs), providing information and
DIRECT TO capability.
next available user waypoint number.
Allows the user to perform a DIRECT TO any point in
13
General Information
KMD 150 Pilot's Guide

Advertisement

   Related Manuals for Honeywell KMD-150

Comments to this Manuals

Symbols: 0
Latest comments: