Setup Of Navigation Functions - Honeywell KMD-150 Pilot's Manual

Getting Started

SETUP OF NAVIGATION FUNCTIONS

The adjacent screen
allows the navigation
functions to be config-
ured. It can be reached
by pressing SET UP in
MAIN MENU, followed by
NAV SETUP. This
screen is not available in
External GPS mode.
Each of the displayed
features can be set by
using the joystick. They
are as follows:
CDI SCALE: Sets the full scale deflection of displayed CDIs to 0.3, 1.0,
2.5 or 5.0nm.
CDI DISPLAY: Either turns the CDI display off, or sets it to either a
numeric or bar display.
CDI AUDIO ALARM: Switches the CDI alarm on or off. When on, it is
activated at full scale deflection.
ARRIVAL ALARM: Sets the distance away from your destination way-
point at which you wish the audio and visual arrival alarms to be acti-
vated. This value is always in nautical miles.
AUTO LEG SELECT: When switched on, the unit will automatically
determine which is the most appropriate leg to fly when calling up a flight
plan.
AUTO NEXT LEG: When switched on, the unit will automatically
sequence you on to the next waypoint in a flight plan when it has
deemed that the current waypoint has been passed. When switched off
the user will be expected to press the NEXT LEG key in MAP MODE to
sequence on to the next waypoint in the flight plan.
TURN ANTICIPATION: Turn Anticipation provides navigation along a
curved path segment to ensure a smooth transition between two adja-
cent legs in the flight plan.
FLIGHT PLAN DISPLAY: Allows all legs in the active flight plan to be
displayed or just the active flight plan leg to be displayed when flying a
flight plan.
INTERNAL (ARRIVAL and CDI) ALARM: These alarms can be
switched on or off.
EXTERNAL (ARRIVAL and CDI) ALARM: These alarms can be
switched on or off.
30
Rev 1 Mar/2000
KMD 150 Pilot's Guide