Transportation And Storage; Cleaning - Siemens SITRANS F Operating Instructions Manual

● You can find your local contact partner for Industry Automation and Drives Technologies
● Information about field service, repairs, spare parts and lots more under "Services."
Additional Support
Please contact your local Siemens representative and offices if you have additional
questions about the device.
Find your local contact partner at: http://www.automation.siemens.com/partner
(http://www.automation.siemens.com/partner)
10.5

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
Special conditions for storage and transportation of the device are listed in "Technical data"
(Page 163).
10.6

Cleaning

Cleaning the enclosure
● Clean the outside of the enclosure and the display window using a cloth moistened with
● Do not use aggressive cleaning agents or solvents. Plastic components or painted
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01
in our partner database.
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
 Provide additional packaging as necessary.
water or a mild detergent.
surfaces could be damaged.
Service and maintenance
10.5 Transportation and storage
151