Introduction
1.3 Transportation and storage
Identification
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Figure 1-1
1.3
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
●
6
MEM specification
Protection
TS Medium
PS
Material
Connection
Serial number
Code number
PED specification
FVA250 nameplate example
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
Electrical specifications of the output / transducer (MEM)
Protection class for the display housing
Maximum temperature of the medium
Maximum pressure of the medium
Material of the wetted parts
Connection type of the device
Device specific serial number and the manufacturing year
Device specific code number
Category acc. to Pressure Equipment Directive (PED)
Operating Instructions, 02/2013, A5E03821131-01
SITRANS FVA250