Chapter Four Integrated Raid System; How To Enter Sata Raid Confi Guration Interface; Application Of Control Keys; Sata Raid Confi Guration - Inspur NX8840 Manual

Chapter Four Integrated RAID System

Chapter Four Integrated RAID System
This chapter mainly introduces configuration of mainboard integrated SATA
controller RAID and its usage.
To use a mainboard integrated SATA RAID, it is required to enter BIOS, set
Chipset→PCH→SCU devices option to [Enabled], and then set Onboard SATA Oprom
option to [Enabled].
4.1 How to Enter SATA RAID Confi guration Interface
1. During system startup, the following content will display on the screen:
Press<CTRL-I> to enter Confi guration Utility...
2. Press [Ctrl][I] to enter SATA RAID confi guration interface.

4.2 Application of Control Keys

Press Key
↑↓
TAB
Enter
Esc
4.3 SATA RAID Confi guration
After entering SATA RAID configuration interface, menu list information,
information of hard disk connecting to SATA controller (hard disk ID number, hard disk
type, hard disk capacity as well as whether hard disk is a volume member etc.), existed
RAID volume information (including volume ID number, name, RAID level, capacity,
status, whether information bootable) will all display. As shown in the following fi gure:
Description
Used to move cursor in different menus or to change values
of menu options.
To select the next menu setting option.
To select menu.
To exit menu or return to previous menu from sub-menu.
28