Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
3.3.2
Input objects
3.3.2.1
Group objects General
No.
0
This parameter is enabled if the parameter Enable group object "Request status values" 1 bit in
General, p. 21, is set to Yes.
If this group object receives a telegram with the value x (x = 0/1/0 or 1), all group objects Status are sent on the bus,
provided that the parameter Send status values in
change or request or Cyclically and on change.
Option x = 1 produces the following function:
Telegram value:
3.3.2.2
Group objects Channel A
No.
12
This group object is enabled if there is an output type set in
set the input format.
The following values can be sent:
13
This group object is enabled if the parameter Enable function Dimming in
Yes.
This group object switches the output on (100 % or parameterized brightness value) or off. It can, for example, be linked
with the 1-bit group object of a dimmer button.
If cyclical monitoring of the input value is active, the switching object is not monitored.
52 2CDC505163D0201 | AA/S 4.1.2, AA/A 2.1.2
Function
Request status values
1 = All status messages are sent
0 = No reaction
Function
Input value
1-byte value [0...100] %
1-byte value [0...+255]
1-byte value [-128...+127]
2-byte value [0...+65,535]
2-byte value [-32,768...+32,767]
2-byte value (floating point)
4-byte value (IEEE float. point)
Switch
Object name
General
Parameter window A:
General, p. 26, is set to On change or After a
Object name
Channel A
Parameter window A:
DPT
5.001
DPT
5,005
DPT
6.010
DPT
7.001
DPT
8.001
DPT
9.0xx
DPT
14.0xx
Channel A
Parameter window A:
Data type
Flags
1 bit
C, W, U
DPT 1.017
Parameter window
Data type
Flags
Variable
C, W, U
DPT variable
General, p. 26. This then allows you to
1 bit
C, R, T
DPT 1.001
General, p. 26, is set to
Advertisement
Table of Contents
