Check Device Status - Emerson Rosemount 3308A Reference Manual

Reference Manual
00809-0100-4308, Rev CA
5.4

Check device status

The overall device status is presented in AMS Wireless Configurator and Field Communicator under the
Overview screen. The Rosemount 3308 Series reports diagnostic alerts when there is a device
malfunction. For information on these alerts, see
Communicator" on page
measured variables, see
To check device status and see whether there are any Active Alerts reported, do one of the following:
The overall device status is presented in the Overview screen. If status is anything than Good, select the
button in the device status image to open a window with Active Alerts. The different device status
images can be found in
Active Alerts can also be obtained via Service Tools > Alerts > Active Alerts.
Table 5-1. Presentation of Device Status Images
Device status image
Operation
PRELIMINARY
"Alert messages in AMS Wireless Configurator and Field
86. The device can also be configured to report user defined alerts based on the
"Alert setup" on page 172 for more information.
Table 5-1.
Condition
Good: No active alert.
Failed: At least one Failure Alert is active. Click the Troubleshoot
button to open a window with Active Alerts together with
recommended actions.
Maintenance: At least one Maintenance Alert is active (and no Failed
alerts). Click the Investigate button to open a window with Active
Alerts together with recommended actions.
Advisory: At least one Advisory Alert is active (and no Failed or
Maintenance Alerts). Click the Investigate button to open a window
with Active Alerts together with recommended actions.
Operation
August 2017
81