Table of Contents
Advertisement
Configuration
August 2017
Get the latest Device Descriptor (DD)
The Device Descriptor (DD) is a configuration tool that is developed to assist the user through the
configuration.
The Rosemount 3308 Series DD is typically installed together with AMS Wireless Configurator. To
download the latest HART DD, visit the Emerson
EmersonProcess.com/Devicefiles
After downloading, add the DD to AMS Wireless Configurator:
1. Close AMS Wireless Configurator.
2. Go to Start > Programs > AMS Device Manager and select Add Device Type.
3. Browse to the downloaded DD files and select Ok.
In the Add Device Type application, select the Help button for more information on how to complete this
operation.
Configure the HART modem interface
Before connecting to the device using a HART modem, the HART modem interface must be configured
in AMS Wireless Configurator:
1. Close AMS Wireless Configurator.
2. Go to Start > Programs > AMS Device Manager and select Network Configuration.
3. Select Add.
4. In the drop down list, select HART modem and then select Install.
5. Follow the on-screen instructions.
In the Network Configuration application, select the Help button for more information on how to
complete this operation.
Configure the wireless network interface
Before connecting to the device wirelessly using a Wireless Gateway, the wireless network must be
configured in AMS Wireless Configurator:
1. Close AMS Wireless Configurator.
2. Go to Start > Programs > AMS Device Manager and select Network Configuration.
3. Select Add.
4. In the drop down list select Wireless Network and then select Install.
5. Follow the on-screen instructions.
In the Network Configuration application, select the Help button for more information on how to
complete this operation.
62
PRELIMINARY
™
Device Install Kit site at:
Reference Manual
00809-0100-4308, Rev CA
Configuration
Advertisement
Table of Contents
Troubleshooting
