Reference Manual
00809-0100-4308, Rev CA
5.2
Device display screen messages
The device display can be used to present different variables and a diagnostic screen sequence.
5.2.1
Variable screens
If the Display Mode is set to Periodic, the device display shows a periodic sequence of user-chosen
variables during operation. A new screen appears according to configured wireless update rate. The
device display will also show ALERT PRESNT if at least one alert is present. For information on how to
configure the device display, see
The Rosemount
Figure 5-1. LCD Display Variables
Upper Product Thickness
Operation
PRELIMINARY
"Device display" on page
™
3308 Series Transmitter can display the following variables:
Percent of Range
Total Volume
Signal Quality
165.
Level
Interface Distance
Electronics Temperature
Operation
August 2017
Distance
Interface Level
Supply Voltage
77