Configuration Parameters; Guided Setup - Emerson Rosemount 3308A Reference Manual

Reference Manual
00809-0100-4308, Rev CA
D.3

Configuration parameters

This section presents a brief introduction to all configuration parameters.
The Rosemount
distance measurements, and interface thickness.
The Rosemount 3308 Series Transmitter can be pre-configured according to the ordering specifications
in the Configuration Data Sheet.
D.3.1

Guided setup

Basic setup
The basic transmitter configuration includes setting the tank geometry parameters. For interface
measurements the dielectric constant of the top liquid must also be given. For some applications with
heavy vapor, the Vapor Dielectric Constant must be given as well.
Figure D-2. Tank Geometry
A
B
A. Product Level
B. Interface Level
C. Upper Reference Point
The Upper Reference Point is located at the underside of the threaded adapter, transmitter flange, or Tri
Clamp, as illustrated in, as illustrated in
Configuration Parameters
PRELIMINARY
™
3308 Series Transmitter can be configured for level, volume, interface level, interface
Figure D-3 on page
Configuration Parameters
C
E
D
F
D. Probe Length
E. Tank Height
F. Zero Reference Point
162.
August 2017
161