Emerson Rosemount 3308A Reference Manual page 63

Reference Manual
00809-0100-4308, Rev CA
Adjusting the probe length
1. Determine L, the desired probe length.
2. Determine n, the number of middle segments needed for the desired probe length. See
page
3. Calculate Y, the length of the bottom segment. See
4. Continue as follows:
Length of bottom segment (Y)
Installation
PRELIMINARY
L, desired probe length:
53.
n, number of middle segments:
Y, length of bottom segment:
Y < 0.4 in. (10 mm)
Y 0.4 in. (10 mm)
Y = 31.5 in. (800 mm)
L
n
Table 3-6 on page 53.
Action
Continue with step (7).
Do not use the bottom segment.
Continue with step (5) and cut the bottom segment.
1. Add one extra middle segment to the calculated n.
2. Continue with step (7).
Installation
August 2017
Table 3-6 on
Y
51