Field Communicator - Emerson Rosemount 3308A Reference Manual

Reference Manual
00809-0100-4308, Rev CA
4.5.2

Field Communicator

This section describes how to prepare the Field Communicator to communicate with a Rosemount 3308
Series Transmitter. The Field Communicator can be used to configure the device with a point-to-point
connection. Connect the leads on the Field Communicator to the communication terminals of the
device as shown in
Figure 4-3. Connect Point-to-Point using a Field Communicator
A. Communication terminals
Get the latest Device Descriptor (DD)
If the DD is not installed in your Field Communicator, see the appropriate Field Communicator User's
Manual available at
Communicator with the latest DD.
Configuration
PRELIMINARY
Figure 4-3.
A
Emerson.com/FieldCommunicator
1 2 3
4 5 6
7 8 9
0
for instructions on how to update the Field
Configuration
August 2017
63