End Weight And Anchoring Options; Engineered Solutions - Emerson Rosemount 3308A Reference Manual

Reference Manual
00809-0100-4308, Rev CA
Table A-12. End Weight
Item
Small weight (code W1)
Short weight (code W2)
Heavy weight (code W3)
Flexible twin lead probe
A.3.8 End weight and anchoring
options
There are in total four weight and anchoring options for
flexible single lead probes. See
dimensions.
Small weight (code W1)
A small weight is recommended for narrow tank openings
less than 1.5 inches (38 mm). Required weight option for
PTFE covered probes.
Short weight (code W2)
A short weight is available for the single flexible stainless
steel probe. It is recommended for maximized measuring
ranges with measurements close to the probe end.
Heavy weight (code W3)
A heavy weight is the recommended choice for most
applications.
Chuck (code W4)
To tie probe end to tank bottom.
A.3.9 Engineered solutions
When standard model codes are not sufficient to fulfill
requirements, please consult the factory to explore possible
Engineered Solutions. This is typically, but not exclusively,
related to the choice of wetted materials or the design of a
process connection. These Engineered Solutions are part of
the expanded offerings and may be subject to additional
delivery lead time. For ordering, factory will supply a special
P-labeled numeric option code that should be added at the
end of the standard model string.
Specifications and Reference Data
PRELIMINARY
Weight
SST probe: 0.88 lb (0.40 kg)
PTFE covered probe: 2.20 lb (1 kg)
0.88 lb (0.40 kg)
2.43 lb (1.10 kg)
1.3 lb (0.60 kg)
Figure A-11 on page 139
Specifications and Reference Data
for
August 2017
123