Emerson Rosemount 3308A Reference Manual page 91

Reference Manual
00809-0100-4308, Rev CA
Figure 5-2. Diagnostic Button Screen Sequence
1. Device Information: Tag
User entered tag which is 8
characters long. This screen will
not display if all characters are
blank.
4. Network ID
Used to determine the entered
Network ID in the device.
7.Variable Screens
At the end of the sequence, the
device display shows all selected
variable screens.
Operation
PRELIMINARY
2. Device Serial Number
Used to determine Device Serial
Number.
5. Network Connection Status
The screen displayed is dependent
on the progress of the device in
joining the wireless network. See
Figure 4-7 on page 69
information.
8. Active Alert Present
This screen will only appear if there
is at least one Active Alert present.
For detailed information of the
failure source and recommended
actions, go to the Active Alerts
screen in AMS Wireless
Configurator or Field
Communicator. Refer to
device status" on page
3. Software Revision
Used to determine Device
Software Revision.
6. Active Alert Screens
(if present)
See "Device display alerts" on
page 84 for a full list of Active
Alerts that may appear on this
for more position of the sequence.
"Check
81.
Operation
August 2017
79