European Union Directive Information; Telecommunication Compliance; Fcc And Ic; Ordinary Location Certification For Fm Approvals - Emerson Rosemount 3308A Reference Manual

Product Certifications
August 2017
B.2 European Union directive
information
The EU Declaration of Conformity for all applicable European
directives for this product can be found in the 3308A
Certifications document. The most current revision is available at
Emerson.com/Rosemount.
B.3 Telecommunication compliance
All wireless devices require certification to ensure that they adhere
to regulations regarding the use of the RF spectrum. Nearly every
country requires this type of product certification. Emerson
working with governmental agencies around the world to supply
fully compliant products and remove the risk of violating country
directives or laws governing wireless device usage.
B.4 FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: This device may not cause
harmful interference and this device must accept any interference,
including any interference that may cause undesired operation of
the device. This device must be installed to ensure a minimum
antenna separation distance of 20 cm from all persons.
This radio transmitter (IC: 2931A-330858) has been approved by
Industry Canada to operate with the antenna types listed below
with the maximum permissible gain indicated. Antenna types not
included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this
device.
Antenna Antenna type
model
option
WK1 Integral Omni-directional
WM1 Integral Omni-directional
WN1 Remote Omni-directional
WS1 Remote Yagi
WT1 Remote Sector
WV1 Remote Parabolic
148
PRELIMINARY
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including any interference that may cause
undesired operation of the device.
Product
Changes or modifications to the equipment not expressly
approved by Emerson could void the user's authority to
operate the equipment.
Cet appareil est conforme à la norme RSS Industrie Canada exempt
de licence. Son fonctionnement est soumis aux deux conditions
™
is
suivantes: (1) cet appareil ne doit pas provoquer d'interférences et
(2) cet appareil doit accepter toute interférence, y compris les
interferences pouvant causer un mauvais fonctionnement du
dispositif.
Les changements ou les modifications apportés à
l'équipement qui n'est pas expressément approuvé par
Emerson pourraient annuler l'autorité de l'utilisateur à utiliser
cet équipement.
B.5 Ordinary location certification for
FM approvals
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and
fire protection requirements by FM Approvals, a nationally
recognized testing laboratory (NRTL) as accredited by the Federal
Max gain Status
Occupational Safety and Health Administration (OSHA).
(dBi)
B.6 Hazardous locations certificates
2 Available
B.6.1 U.S.A.
4.5 Available
8 Available
I5
12 Future
17 Future
24 Future
U.S.A Intrinsically Safe
Certificate: FM17US0014X
Standards: FM Class 3600 – 2011, FM Class 3610 – 2015, FM
Class 3810 – 2005, NEMA
60079-0:2013, ANSI/UL 60079-11:2014,
ANSI/ISA 60529:2004, ANSI/ISA 61010-1:2004
Markings: IS CL I, DIV 1, GP A, B, C, D:
IS CL I Zone 0, AEx ia IIC T4 Ga;
T4 Ta = -55 to +70 °C
Type 4X; IP66; IP67
WHEN INSTALLED PER ROSEMOUNT DRAWING
03308-1010 (See Figure B-1 on page
Reference Manual
00809-0100-4308, Rev CA
®
250 – 2003, ANSI/ISA
151)
Product Certifications