Emerson Rosemount 3308A Reference Manual page 42

Installation
August 2017
Rigid single lead probe (8 mm)
Note
Centering discs shall not be used with PTFE covered probes.
1. Drill one hole using the drilling fixture (included in your shipment).
A
A. Drilling fixture
B. Probe
2. Mount the bushing, centering disc, and washer at the probe end.
Note
Do not mount the washer if the centering disc material is PTFE.
A
A. Washer
B. Centering disc
C. Bushing
3. Insert the split pin through the bushing and the probe.
30
PRELIMINARY
B
C
B
Reference Manual
00809-0100-4308, Rev CA
Installation