Installation
August 2017
3.6.3
Tank connection with loose flange ("plate design")
The transmitter is delivered with head, flange and probe assembled into one unit. If, for some reason,
these parts have been disassembled, mount the transmitter as described below:
1. Mount the flange on the probe and tighten the flange nut.
2. Place a gasket on top of the tank flange.
3. Lower the probe with flange into the tank.
4. Tighten bolts and nuts with sufficient torque for the flange and gasket choice.
40
PRELIMINARY
60 mm
Gasket
Reference Manual
00809-0100-4308, Rev CA
Installation