Enter Network Id And Join Key; Verify Device Joins Network - Emerson Rosemount 3308A Reference Manual

Configuration
August 2017
4.6.5

Enter network ID and join key

The devices must be configured with the same Network ID and Join Key as the Gateway in order to join
the network. Use a Field Communicator or AMS Wireless Configurator to enter the Network ID and Join
Key so they match the Network ID and Join Key of the Gateway.
1. Select Configure > Guided Setup > Wireless Setup.
2. Select Join Device to Network, and follow the instructions.
If the device is not to be commissioned yet, remove the power module and fasten the housing cover. This
is to conserve power module life and to ensure safe transmitter transportation. The power module
should be inserted only when the device is ready to be commissioned.
4.6.6

Verify device joins network

Network connection can be verified in four ways, further described in this section:
1. At the device display
2. Using the AMS Wireless Configurator
3. In the Wireless Gateway's integrated web interface
4. Using the Field Communicator
If the Rosemount 3308 Series was configured with the Network ID and Join Key, and sufficient time has
passed, the transmitter should be connected to the network. It usually takes a few minutes for the device
to join the network. If the device has not joined the network, please see
ing" on page
Verify by device display
To verify that the device is connected to the network by the display, press the DIAG button. The display
will show: the Tag, Device Serial Number, Software Revision, Network ID, Network Connection Status,
and Device Status screens. Refer to
When the network diagnostic status is displayed as "NETWK OK", the device has successfully joined the
network. When joining the wireless network, the status displayed will be changed through the sequence
until the device finally has joined the network.
connection status screens.
68
PRELIMINARY
92.
"Diagnostic button screen sequence" on page
"Wireless network troubleshoot-
Figure 4-7 on page 69 presents the different network
Reference Manual
00809-0100-4308, Rev CA
78.
Configuration