High Gain Remote Antenna Option
August 2017
C.5
Install the high gain remote antenna
1. Mount the transmitter following best practice mounting procedures as outlined in
Installation.
2. Connect the RF lightning arrestor to the device and tighten.
3. Connect the antenna to the mounting bracket and tighten the nut carefully.
4. Fasten the mounting bracket on the mast. Tighten the nuts loosely first to allow adjustment of the
mounting bracket position in
156
PRELIMINARY
RF lightning arrestor
Step
5.
Reference Manual
00809-0100-4308, Rev CA
Section 3:
High Gain Remote Antenna Option