Emerson Rosemount 3308A Reference Manual page 56

Installation
August 2017
Verify probe length
Segmented probe ordered with model code 4S
Before installation, verify the probe length (L) on the label. If the probe length needs to be adjusted, see
"Adjusting the probe length" on page
Segmented probe ordered as spare part kit
Before installation, the number of segments that add up to the desired probe length must be
determined. Also, the bottom segment may need to be shortened. See
page 51.
Assemble the segmented probe
Note
If there is enough space beside the tank, the probe can be assembled before inserting it into the tank.
1. Insert the stop screw to the top segment. Tighten approximately two turns.
Top Segment
44
PRELIMINARY
51.
Probe segments box
Two turns
~
Reference Manual
00809-0100-4308, Rev CA
SN:
L =
Probe length
"Adjusting the probe length" on
Installation