Authentication By User Name And Password - Canon Oce PlotWave 300 Administration Manual

Authentication by user name and password

Authentication by user name and password
Configure the user authentication by user name and password
Introduction
Perform the following steps to activate and configure the user authentication by user name and
password
Before you begin
A domain containing users with Microsoft Active Directory credentials.
Check that the printer 'Current date and time' and 'Time zone' values are correct (in Océ Express
WebTools, Configuration - System defaults)
Activate the User name and password authentication
1. In a web browser, enter the URL or IP address of the printer to open Océ Express WebTools
2. Open the 'Security' - 'Configuration' page.
Log in as a system administrator if requested.
3. In the 'User access mode' section, select 'User name and password' as the 'User
authentication':
4. The restart is required. Select 'Restart now'.
When 'User access mode' is set to 'Smart card' or 'User name and password', the system
must be restarted to guarantee the data confidentiality of future incoming jobs. Do not select
'Restart later'.
Create the domain(s) and set the user access configuration settings
Procedure
1. Open the 'Security' - 'Domains' page
334 Chapter 6 - Security on Océ ColorWave 500 and Océ ColorWave 700