Canon Oce PlotWave 300 Administration Manual page 211

Create the filter list
2. In the 'Manage IP filter lists' tab click 'Add'
3. Enter a filter name and a description and click 'Add'
4. Click 'Next' to open the wizard
5. Check the 'Mirrored' checkbox and click 'Next'
6. Select 'My IP address' as the 'Source address and click 'Next'
7. Select 'A specific IP address or subnet' as 'Destination address' and enter the IP address of the
controller
Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550 211