Canon Oce PlotWave 300 Administration Manual page 209

3. Select 'IP Security Policy Management' and click 'Add' to add it to the root console
4. Keep 'Local computer' checked and click 'Finish'
The security snap-in is added, click 'OK'
Create the security policy
Procedure
1. In the console, right click on 'IP Security Policies on local Computer' and select 'Create IP Security
Policy'
2. Click 'Next' to open the wizard
Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550
Create the security policy
209