Canon Oce PlotWave 300 Administration Manual page 189

Example: 'user1@mydomain.com' is logged in on the printer. This user will see only the jobs
that have been submitted by 'user1@mydomain.com'. So the user must make sure that the
submission process embedded this information.
When this setting is not activated, only the user name (without the suffix) is used for the job
filtering.
Example: 'user1' only is used for filtering the job sent by all 'user1' users, if several. When
logged in on the printer, 'user1' will have access to all jobs submitted by:
• 'user1@mydomain.com'
• 'user1'
• 'user1@anydomain.net'
Validate the configuration
When to do
After you configured the authentication by user name and password, validate it.
Procedure
1. Below the 'User access mode' section, click 'Validate the configuration'.
2. Select the domain name.
3. Enter a valid user name and the associated password.
4. Click 'OK'.
A report is generated:
Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550
Validate the configuration
189