Canon Oce PlotWave 300 Administration Manual page 94

Description of the overall procedure to request and import a CA-signed certificate
Step
B4- Import the Root certificate into
the web browsers of the worksta-
tions
B5- Back up the certificate and pri-
vate key
Other procedures
Procedure
Restore a certificate and a private
key
Reset the current certificate
94 Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
Description
The Root certificate identifies the Certification Authority.
By default, the web browsers contain a list of well-
known and trusted Root certificates.
In case the Root certificate of the Certification Authority
is not in this list, install the CA Root certificate in the
'Trusted Root certificates' list of the web browser, on
each workstation.
Check and import the Root certificate into the work-
See
stations browser on page
Back up and store the certificate and the private key.
Note: It is highly recommended to back up the CA-sign-
ed certificate and the private key since they are not
saved in any system backup.
Back up a certificate and a private key on page
See
When to do
You can restore the certificate and the private key at any
moment, in case of need.
Restore a certificate and a private key on page 144
See
You can reset the certificate after a certificate request or
at any moment when you want to restore a self-signed
certificate.
This procedure creates a new Océ self-signed certificate.
Reset the current certificate on page 144
See
143.
140.