Prevent Any Outgoing Connection To The Internet - Canon Oce PlotWave 300 Administration Manual

Prevent any outgoing connection to the Internet

Prevent any outgoing connection to the Internet
Introduction
Some features of the following systems allow or request a connection over the Internet to work
properly:
• Océ ColorWave 550 R2.3 and higher
• Océ ColorWave 600 R1.6 and higher
• Océ ColorWave 650 R2.3 and higher
• Océ ColorWave 650 R3 and higher
When the Security Policy in a company prevents any outgoing network traffic over the Internet,
perform all the following actions in Express WebTools:
St In the Express WebT‐
ep ools section
1 Support - Remote Serv-
ice - Remote assistance
2 Preferences - System
Properties - Service
3 Configuration - Remote
destination [X]
4 Support - About - Shut-
down - Restart
276 Chapter 5 - Security on Océ ColorWave 550/600/650 (and Poster Printer)
Action
Stop the Remote assistance if it is
activated
Disable Remote Service connection
Disable all scan destinations to FTP
sites reachable through the Internet
Restart the system
Detail
Click 'Stop remote assis-
tance' until it changes into
'Allow remote assistance' .
The two blinking arrows
on the right side disap-
pear.
Set 'Océ Remote Services
connection enabled' to
'Disabled'