Prevent Any Outgoing Connection To The Internet - Canon Oce PlotWave 300 Administration Manual

Prevent any outgoing connection to the Internet

Prevent any outgoing connection to the Internet

Introduction
Some system features allow or request a connection over the Internet to work properly.
When the Security Policy in a company prevents any outgoing network traffic over the Internet,
perform all the following actions, step by step, in Express WebTools:
In the Express WebT‐
ools section
1 Support - Remote
Service - Remote as-
sistance
2 Preferences - System
Defaults - Service rela-
ted information
3 Configuration - Con-
nectivity - Other net-
work interfaces
4 Configuration - Exter-
nal location
5 Configuration - Con-
nectivity - Proxy set-
tings
6 Support - About - Shut
down
310 Chapter 6 - Security on Océ ColorWave 500 and Océ ColorWave 700
Action
Stop the Remote assistance if it is
activated
Disable Online Services or Remote
Service
Disable the automatic update of
the embedded Service information
Delete all External locations going
to the Internet:
• External cloud through WebDAV
protocol
• FTP sites reachable through the
Internet
Disable the proxy (recommended
as an additional security measure)
Restart the system
Detail
Click 'Stop remote assis-
tance' until it changes into
'Allow remote assistance' .
The two blinking arrows on
the right side disappear.
Set 'Océ Online Services con-
nection enabled' or 'Remote
Service connection' to 'Disa-
bled'
Set ' Allow automatic update
of Océ service information'
or 'Allow automatic update
of embedded Service docu-
mentation' to 'Disabled'
Set 'Proxy enabled' to 'Disa-
bled'